| Link to Single Entry | Incident No. | Incident Date | Item Part No. | Item Part Description | Quantity | Drawing No. | JO NO. | PO/SO. NO. | GRN/OR/CR No. | Operation | Created By | Created Date | Title | Incident Description | Standard | Reference | Type | Supplier / Customer Name | Upload Document | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| View Details | NCR-2024-00055 | 05/25/2024 | CSNDF288F7 | VEE RING MATERIAL : 15% GLASS, 5% MOLY FILLED TEFLON | 300 | CSNDF288F7 | Not Mentioned | Not Mentioned | GR2324/00576 | Not Mentioned | QC | 05/25/2024 | NCR-24-003 (Incoming Inspection ) | Require Total length 5.99mm ± 0.127 mm, observed - 6.25mm which is not ok as per drawing. 1. Inspection report attached. | Not Mentioned | Not Mentioned | Supplier | Customer - Tanna Polymers | NCR-24-003-Incoming-Inspection-.pdf | |||
| View Details | NCR-2024-00056 | 05/25/2024 | CSNDF288F7 | VEE RING MATERIAL : 15% GLASS, 5% MOLY FILLED TEFLON | 0 | CSNDF288F7 | Not Mentioned | Not Mentioned | GR2324/00576 | Not Mentioned | QC | 05/25/2024 | NCR-24-004 (Incoming Inspection ) | Require Total length 5.99mm ± 0.127 mm, observed - 6.25mm which is not ok as per drawing. 1. Inspection report attached. | Not Mentioned | Not Mentioned | Supplier | Name of Customer - Tanna Polymers | NCR-24-004-Incoming-Inspection-.pdf | |||
| View Details | NCR-2024-00057 | 05/30/2024 | CSNDF288F8 | MALE ADAPTER MATERIAL : 30% GLASS FILLED PEEK | 20 | CSNDF288F8 | Not Mentioned | Not Mentioned | GR2324/00744 | Not Mentioned | QC | 05/25/2024 | NCR-24-005 (Incoming Inspection ) | Require Total length 5.99mm ± 0.127 mm, observed - 6.25mm which is not ok as per drawing.1(a). Inspection report attached. | Not Mentioned | Not Mentioned | Supplier | Name of Customer - Tanna Polymers | NCR-24-005-Incoming-Inspection-.pdf | |||
| View Details | NCR-2024-00058 | 05/30/2024 | CSNDF237F3 | WIPER SEAL MATERIAL : 30% GLASS FILLED PEEK | 10 | CSNDF237F3 | Not Mentioned | Not Mentioned | GR2324/00744 | Not Mentioned | QC | 05/30/2024 | NCR-24-005 (Incoming Inspection ) | 1 pcs received without machining, which is not ok as per drawing. | Not Mentioned | Not Mentioned | Supplier | Name of Customer - Tanna Polymers | NCR-24-005-Incoming-Inspection-1.pdf | |||
| View Details | NCR-2024-00059 | 06/01/2024 | CPH845H9XXH00TC | 3 1/2" Hydro Trip Sub, 13Cr-80 Material, BLANK ends for 3-1/2" 9.2# TSH CS Hydril threads | 30 | CPH845H9XXH00TC | J2403-0066 | Not Mentioned | Not Mentioned | Assembly | QC | 06/01/2024 | NCR-24-015 Final Assembly | Assembly finished with non-confirmed part. Part number 0638242381--DIA 3/8-24 X 0.38 LTH, SHEAR SCREW DOG TYPE MATERIAL: BRASS UNS C46400 not met the required shear value. | Not Mentioned | Not Mentioned | In-house | NCR-24-015-Final-Assembly.pdf | ||||
| View Details | NCR-2024-00045 | 01/02/2024 | CBG1035M1 | BODY FOR MAX OD 3500 (FOR GEO-DYNAMIC) MIDGET BRIDGE PLUG SUB-ASSY, MATERIAL : CLASS 40 GREY CAST IRON | 1 | CBG1035M1 | J2212-0019 | NA | NA | Inprocess inspection | QC | 01/02/2024 | NCR-23-68(Inprocess inspection) | Thread cut on buttress thread approx. | NA | NA | In-house | |||||
| View Details | NCR-2024-00050 | 01/18/2024 | 127-050 | Pipe OD 100mm X ID 50mm Grade- 4140 | 0 | 127-050 | Not Mentioned | PO2324/00433 | GR2324/00594 | Not Mentioned | QC | 01/18/2024 | NCR-23-73 (Incoming Inspection) | 1. Required material AISI 4140, Received material AISI 4130. | Not Mentioned | Not Mentioned | Supplier | Alinco Metal Industries | ||||
| View Details | NCR-2024-00051 | 01/27/2024 | 122-02 | O.D 85mm X I.D 55mm, Grade-17-4PH | 0 | 122-02 | Not Mentioned | PO2324/00368 | GR2324/00498 | Not Mentioned | QC | 01/27/2024 | NCR-23-74 (Incoming Inspection) | 1. Required & Received material as a pipe , Received as a pipe, mention Round bar in certificate. | Not Mentioned | Not Mentioned | Supplier | Alinco Metal Industries | ||||
| View Details | NCR-2024-00054 | 05/02/2024 | CSNDX288H042 | 3 1/2" 9.3# X PROFILE INNER SLEEVE | 0 | CSNDX288H042 | J2403-0018 | Not Mentioned | Not Mentioned | Not Mentioned | QC | 05/02/2024 | 3 1/2" 9.3# X PROFILE INNER SLEEVE NCR-24-0002 | From third party supplier, as per drawing 4x 1/8" x 90-degree hole through. But on one product drilled 8 holes x 45 degree. Also surface finish not meeting the requirement. | Not Mentioned | Not Mentioned | Supplier | Not Mentioned | ||||
| View Details | NCR-2024-00060 | 06/03/2024 | CNXN3810H00TC | 4 ½” X 3.813”, ”XN” Nipple Profile MATERIAL : L80 13cr , Thread connection Blank for 12.75# CSH B X P | 1 | CNXN3810H00TC | J2405-0003 | Not Mentioned | Not Mentioned | Assembly | QC | 06/03/2024 | NCR-24-016 | Deep grove mark on OD | Not Mentioned | Not Mentioned | In-house | |||||
| Link to Single Entry | Incident No. | Incident Date | Item Part No. | Item Part Description | Quantity | Drawing No. | JO NO. | PO/SO. NO. | GRN/OR/CR No. | Operation | Created By | Created Date | Title | Incident Description | Standard | Reference | Type | Supplier / Customer Name | Upload Document |