| Link to Single Entry | Incident No. | Incident Date | Item Part No. | Item Part Description | Quantity | Drawing No. | JO NO. | PO/SO. NO. | GRN/OR/CR No. | Operation | Created By | Created Date | Title | Incident Description | Standard | Reference | Type | Supplier / Customer Name | Upload Document | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| View Details | NCR-2024-00065 | 06/19/2024 | CSNDX288F043 | PORTED SLEEVE FOR NON ELASTOMERIC, SLIDING SLEEVE DOWN TO OPEN MATERIAL : AISI 4140, 18-22 HRC OR EQ. TO L-80 | 0 | CSNDX288F043 | J2405-0083 | Not Mentioned | Not Mentioned | CNC TURNING PROCESS- 05 & 06 | QC | 06/19/2024 | NCR-24-0022 (Inprocess inspection) | 1] Thread pitch dia is more then required pitch dia.required pitch dia is 96.83496 to 97.00006 mm and observed pitch dia 97.25mm.also there is thread cut observed due t5o power cut. 2] Groove position is shift 5.15mm on upward direction. required groove distance from face is 61.97mm and observed 56.97mm.photo's is also attached. | Not Mentioned | Not Mentioned | In-house | |||||
| View Details | NCR-2024-00060 | 06/03/2024 | CNXN3810H00TC | 4 ½” X 3.813”, ”XN” Nipple Profile MATERIAL : L80 13cr , Thread connection Blank for 12.75# CSH B X P | 1 | CNXN3810H00TC | J2405-0003 | Not Mentioned | Not Mentioned | Assembly | QC | 06/03/2024 | NCR-24-016 | Deep grove mark on OD | Not Mentioned | Not Mentioned | In-house | |||||
| View Details | NCR-2024-00059 | 06/01/2024 | CPH845H9XXH00TC | 3 1/2" Hydro Trip Sub, 13Cr-80 Material, BLANK ends for 3-1/2" 9.2# TSH CS Hydril threads | 30 | CPH845H9XXH00TC | J2403-0066 | Not Mentioned | Not Mentioned | Assembly | QC | 06/01/2024 | NCR-24-015 Final Assembly | Assembly finished with non-confirmed part. Part number 0638242381--DIA 3/8-24 X 0.38 LTH, SHEAR SCREW DOG TYPE MATERIAL: BRASS UNS C46400 not met the required shear value. | Not Mentioned | Not Mentioned | In-house | NCR-24-015-Final-Assembly.pdf | ||||
| View Details | NCR-2024-00054 | 05/02/2024 | CSNDX288H042 | 3 1/2" 9.3# X PROFILE INNER SLEEVE | 0 | CSNDX288H042 | J2403-0018 | Not Mentioned | Not Mentioned | Not Mentioned | QC | 05/02/2024 | 3 1/2" 9.3# X PROFILE INNER SLEEVE NCR-24-0002 | From third party supplier, as per drawing 4x 1/8" x 90-degree hole through. But on one product drilled 8 holes x 45 degree. Also surface finish not meeting the requirement. | Not Mentioned | Not Mentioned | Supplier | Not Mentioned | ||||
| View Details | NCR-2024-00062 | 06/08/2024 | CCW1243M2 | GUIDE, MATERIAL CLASS 40 GREY CAST IRON for 4312 WIRELINE SET SVCR | 25 | CCW1243M2 | J2402-0034.05 | Not Mentioned | Not Mentioned | Final Inspection | QC | 06/08/2024 | NCR-24-0018 | Casting defect/blow hole found after final machining. 25numbers | Not Mentioned | Not Mentioned | In-house | |||||
| View Details | NCR-2024-00047 | 01/03/2024 | CCW1243M | MANDREL, MATERIAL CLASS 40 GREY CAST IRON for 4312 WIRELINE SET SVCR | 1 | CCW1243M1 | J2311-0001.02 | Not Mentioned | Not Mentioned | 6--CNC TURNING - 5 | QC | 01/03/2024 | NCR-23-70(Inprocess inspection) | Thread cut on buttress thread approx | Not Mentioned | Not Mentioned | In-house |  | ||||
| View Details | NCR-2024-00048 | 01/03/2024 | CCW1243M1 | MANDREL, MATERIAL CLASS 40 GREY CAST IRON for 4312 WIRELINE SET SVCR | 1 | CCW1243M1 | J2311-0001.02 | Not Mentioned | Not Mentioned | 6--CNC TURNING - 5 | QC | 01/03/2024 | NCR-23-71(Inprocess inspection) | Blow hole on buttress thread approx. | Not Mentioned | Not Mentioned | In-house |  | ||||
| View Details | NCR-2024-00053 | 05/01/2024 | CBP1456M2 | Shoe 5610 | 0 | CBP1456M2 | J2212-0066 | Not Mentioned | Not Mentioned | Not Mentioned | QC | 05/01/2024 | Drawing dimension changed. NCR-24-001 | Design department did not change any dimensions on the drawing. | Not Mentioned | Not Mentioned | In-house | |||||
| View Details | NCR-2024-00046 | 01/02/2024 | CBG1035M1 | BODY FOR MAX OD 3500 (FOR GEO-DYNAMIC) MIDGET BRIDGE PLUG SUB-ASSY, MATERIAL : CLASS 40 GREY CAST IRON | 1 | CBG1035M1 | J2212-0026 | Not Mentioned | Not Mentioned | 4-CNC | QC | 01/02/2024 | NCR-23-69(Inprocess inspection) | Found blow hole during machining. | Not Mentioned | Not Mentioned | In-house |  | ||||
| View Details | NCR-2024-00045 | 01/02/2024 | CBG1035M1 | BODY FOR MAX OD 3500 (FOR GEO-DYNAMIC) MIDGET BRIDGE PLUG SUB-ASSY, MATERIAL : CLASS 40 GREY CAST IRON | 1 | CBG1035M1 | J2212-0019 | NA | NA | Inprocess inspection | QC | 01/02/2024 | NCR-23-68(Inprocess inspection) | Thread cut on buttress thread approx. | NA | NA | In-house | |||||
| Link to Single Entry | Incident No. | Incident Date | Item Part No. | Item Part Description | Quantity | Drawing No. | JO NO. | PO/SO. NO. | GRN/OR/CR No. | Operation | Created By | Created Date | Title | Incident Description | Standard | Reference | Type | Supplier / Customer Name | Upload Document |
