Heavy Duty Bumper Springs
Features
- Used with fast falling plungers and by-pass plungers
- Large ports for maximum flow and least amount of downhole re- striction
- Heavy duty extended spring for maximum durability
- 17-4 SS head with 17-7 SS Spring and NACE Body construction
- Titanium head available for ball and sleeves
- Inconel spring available for H2S and CO2
Applications
- Interchangeable with 3 cup hold downs, collet latch downs, collar
Standard Bumper Springs
Features
- Economical BHBS used with conventional plungers to slower falling by – pass plungers
- Constructed from Stainless Steel and NACE material
- Interchangeable with 3 cup hold downs, collet latch downs, collar stops, and TBG stops
Hold Downs and Collets
2 and 3 Cup Hold Downs
- Used to seat BHBS in seat nipple and profile nipples
- Interchangeable with different style of seating cups
- Largest flow through area on the market
- Built in NO-GO on top of tool
- Available in 1-1/2”–2-7/8”
Heavy Duty Collet Latch Downs
- Wells with no seat nipple, set above deviations, or with debris or obstruction in TBG
- Used with fish-neck stops
- Strong deep fingers to allow maximum hold
Tubing Stops
Applications
- Wells without or highly deviated seat nipple
- Gas Lift wells or wells with TBG perforations
- Setting in TBG string without upsets or a need for a more secure and / or positive barrier than a collar stop
- Higher rate wells (fluid and gas) for a better hold
- Fish neck or threaded available
- Available in 1-1/2”–2-7/8” TBG
Collar Stops
Applications
- Wells without or highly deviated seat nipple
- Gas Lift wells or wells with TBG perforations
- Setting in TBG string in-between two joints in a collar
- Moderate rate wells (fluid and gas) for a Features
- Built in NO-GO on Threaded Version
- Fish neck and Threaded Versions available
- NACE Material for corrosion resistance
- Inconel springs for maximum durability
- 2-3/8–2-7/8 TBG available
Multi Stage Tool
Applications
- Marginal Wells that struggle to run a conventional plunger
- High fluid producing wells with low gas volumes (Low GLR)
- Wells that need extended shut in time to lift conventional plunger
- Entirely mechanical; no power or fuel requirement
- Lower installation costs than gas lift and pump jacks
- Works with existing plunger lift equipment
- Available in 2-3/8 and 2-7/8 TBG
Pack-Off Tools
Applications
- Used to isolate fluid above any given point in the TBG string
- Can be used with collar stops, TBG stops and other stop tools
- Used to operate a Pressure Relief Standing Valve or Standing Valve in TBG string
Features
- 100% redressable in the field
- Easy to set and remove
- 4140 and NACE body constructed
- 2-1/16”, 2-3/8, 2-7/8 TBG available
Auto Dump (Pressure Relief Standing Valves)
Applications
- Lower fluid volume wells with conventional plungers
- Used to ensure fluid is retained in the TBG during shut in
- Pressure relief spring will retain a positive seal until the amount of pressure differential across the valve is met
- Testing TBG and or batch treating below TBG
- Used a “Reset” button in loaded up wells
Features
- Inconel X750 pressure relief spring
- Durable seat and ball for extended life
- Redressable and low maintenance
