| Link to Single Entry | Incident No. | Incident Date | Item Part No. | Item Part Description | Quantity | Drawing No. | JO NO. | PO/SO. NO. | GRN/OR/CR No. | Operation | Created By | Created Date | Title | Incident Description | Standard | Reference | Type | Supplier / Customer Name | Upload Document | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| View Details | NCR-2024-00063 | 06/10/2024 | CPS150520243, CPS150520242, CPS150520241 | 1) J2405-0079 , CPS150520243--4 1/2 SSD SEAL STACK ASSY TOOL MATERIAL : AISI 41XX (18-36 HRC). | 0 | CPS150520243, CPS150520242, CPS150520241 | 1) J2405-0079, 2) J2405-0078, 3) J2405-0077 | Not Mentioned | Not Mentioned | Not Mentioned | QC | 06/10/2024 | NCR-24-0019 (IN process Inspection ) | Mentioned job orders are manufactured and directly handover to assembly without QC checked and approval for further procced because it is mfg. on Sunday and move foreword on same date itself | Not Mentioned | Not Mentioned | In-house | |||||
| View Details | NCR-2024-00054 | 05/02/2024 | CSNDX288H042 | 3 1/2" 9.3# X PROFILE INNER SLEEVE | 0 | CSNDX288H042 | J2403-0018 | Not Mentioned | Not Mentioned | Not Mentioned | QC | 05/02/2024 | 3 1/2" 9.3# X PROFILE INNER SLEEVE NCR-24-0002 | From third party supplier, as per drawing 4x 1/8" x 90-degree hole through. But on one product drilled 8 holes x 45 degree. Also surface finish not meeting the requirement. | Not Mentioned | Not Mentioned | Supplier | Not Mentioned | ||||
| View Details | NCR-2024-00059 | 06/01/2024 | CPH845H9XXH00TC | 3 1/2" Hydro Trip Sub, 13Cr-80 Material, BLANK ends for 3-1/2" 9.2# TSH CS Hydril threads | 30 | CPH845H9XXH00TC | J2403-0066 | Not Mentioned | Not Mentioned | Assembly | QC | 06/01/2024 | NCR-24-015 Final Assembly | Assembly finished with non-confirmed part. Part number 0638242381--DIA 3/8-24 X 0.38 LTH, SHEAR SCREW DOG TYPE MATERIAL: BRASS UNS C46400 not met the required shear value. | Not Mentioned | Not Mentioned | In-house | NCR-24-015-Final-Assembly.pdf | ||||
| View Details | NCR-2024-00060 | 06/03/2024 | CNXN3810H00TC | 4 ½” X 3.813”, ”XN” Nipple Profile MATERIAL : L80 13cr , Thread connection Blank for 12.75# CSH B X P | 1 | CNXN3810H00TC | J2405-0003 | Not Mentioned | Not Mentioned | Assembly | QC | 06/03/2024 | NCR-24-016 | Deep grove mark on OD | Not Mentioned | Not Mentioned | In-house | |||||
| View Details | NCR-2024-00045 | 01/02/2024 | CBG1035M1 | BODY FOR MAX OD 3500 (FOR GEO-DYNAMIC) MIDGET BRIDGE PLUG SUB-ASSY, MATERIAL : CLASS 40 GREY CAST IRON | 1 | CBG1035M1 | J2212-0019 | NA | NA | Inprocess inspection | QC | 01/02/2024 | NCR-23-68(Inprocess inspection) | Thread cut on buttress thread approx. | NA | NA | In-house | |||||
| View Details | NCR-2024-00046 | 01/02/2024 | CBG1035M1 | BODY FOR MAX OD 3500 (FOR GEO-DYNAMIC) MIDGET BRIDGE PLUG SUB-ASSY, MATERIAL : CLASS 40 GREY CAST IRON | 1 | CBG1035M1 | J2212-0026 | Not Mentioned | Not Mentioned | 4-CNC | QC | 01/02/2024 | NCR-23-69(Inprocess inspection) | Found blow hole during machining. | Not Mentioned | Not Mentioned | In-house |  | ||||
| View Details | NCR-2024-00052 | 03/13/2024 | CI-CCW1035M4 | GUIDE, MATERIAL - CLASS 40 GREY CAST IRON | 75 | CI-CCW1035M4 | Not Mentioned | Not Mentioned | CR2324/00057 | Not Mentioned | QC | 03/13/2024 | NCR-23-75 (Incoming Inspection of Customer Material) | 1. Inspection report attached. | Not Mentioned | Not Mentioned | Supplier | SAZ Oilfield Services Private Limited | NCR-23-75-Incoming-Inspection-of-Customer-Material-CI-CCW1035M4_F13398.pdf | |||
| View Details | NCR-2024-00062 | 06/08/2024 | CCW1243M2 | GUIDE, MATERIAL CLASS 40 GREY CAST IRON for 4312 WIRELINE SET SVCR | 25 | CCW1243M2 | J2402-0034.05 | Not Mentioned | Not Mentioned | Final Inspection | QC | 06/08/2024 | NCR-24-0018 | Casting defect/blow hole found after final machining. 25numbers | Not Mentioned | Not Mentioned | In-house | |||||
| View Details | NCR-2024-00057 | 05/30/2024 | CSNDF288F8 | MALE ADAPTER MATERIAL : 30% GLASS FILLED PEEK | 20 | CSNDF288F8 | Not Mentioned | Not Mentioned | GR2324/00744 | Not Mentioned | QC | 05/25/2024 | NCR-24-005 (Incoming Inspection ) | Require Total length 5.99mm ± 0.127 mm, observed - 6.25mm which is not ok as per drawing.1(a). Inspection report attached. | Not Mentioned | Not Mentioned | Supplier | Name of Customer - Tanna Polymers | NCR-24-005-Incoming-Inspection-.pdf | |||
| View Details | NCR-2024-00047 | 01/03/2024 | CCW1243M | MANDREL, MATERIAL CLASS 40 GREY CAST IRON for 4312 WIRELINE SET SVCR | 1 | CCW1243M1 | J2311-0001.02 | Not Mentioned | Not Mentioned | 6--CNC TURNING - 5 | QC | 01/03/2024 | NCR-23-70(Inprocess inspection) | Thread cut on buttress thread approx | Not Mentioned | Not Mentioned | In-house |  | ||||
| Link to Single Entry | Incident No. | Incident Date | Item Part No. | Item Part Description | Quantity | Drawing No. | JO NO. | PO/SO. NO. | GRN/OR/CR No. | Operation | Created By | Created Date | Title | Incident Description | Standard | Reference | Type | Supplier / Customer Name | Upload Document |
