| Link to Single Entry | Incident No. | Incident Date | Item Part No. | Item Part Description | Quantity | Drawing No. | JO NO. | PO/SO. NO. | GRN/OR/CR No. | Operation | Created By | Created Date | Title | Incident Description | Standard | Reference | Type | Supplier / Customer Name | Disposition | Justification | Category | Root Cause | Correction Action | Correction Action Date | Correction Action Owner | Corrective Action | Corrective Action Owner | Corrective Action Date | Preventive Action | Preventive Action Owner | Preventive Action Date | Effectiveness | Effectiveness Evidence | Closure Date | Upload Document | Status | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| View Details | NCR-2024-00065 | 06/19/2024 | CSNDX288F043 | PORTED SLEEVE FOR NON ELASTOMERIC, SLIDING SLEEVE DOWN TO OPEN MATERIAL : AISI 4140, 18-22 HRC OR EQ. TO L-80 | 0 | CSNDX288F043 | J2405-0083 | Not Mentioned | Not Mentioned | CNC TURNING PROCESS- 05 & 06 | QC | 06/19/2024 | NCR-24-0022 (Inprocess inspection) | 1] Thread pitch dia is more then required pitch dia.required pitch dia is 96.83496 to 97.00006 mm and observed pitch dia 97.25mm.also there is thread cut observed due t5o power cut. 2] Groove position is shift 5.15mm on upward direction. required groove distance from face is 61.97mm and observed 56.97mm.photo's is also attached. | Not Mentioned | Not Mentioned | In-house | ||||||||||||||||||||||||
| View Details | NCR-2024-00064 | 06/10/2024 | Not Mentioned | SEAL FOR 3 1/2" 9.3# L SLIDING SLEEVE MATERIAL : HNBR 90D | 8 | Not Mentioned | Not Mentioned | Not Mentioned | GR2425/00129 | Not Mentioned | QC | 06/10/2024 | NCR-24-0020 (Incoming Inspection ) | Inspection report attached. | Not Mentioned | Not Mentioned | Supplier | Name of Customer - Hindustan Oilseals Manufacturing Company | NCR-24-0020-Incoming-Inspection-.pdf | ||||||||||||||||||||||
| View Details | NCR-2024-00063 | 06/10/2024 | CPS150520243, CPS150520242, CPS150520241 | 1) J2405-0079 , CPS150520243--4 1/2 SSD SEAL STACK ASSY TOOL MATERIAL : AISI 41XX (18-36 HRC). | 0 | CPS150520243, CPS150520242, CPS150520241 | 1) J2405-0079, 2) J2405-0078, 3) J2405-0077 | Not Mentioned | Not Mentioned | Not Mentioned | QC | 06/10/2024 | NCR-24-0019 (IN process Inspection ) | Mentioned job orders are manufactured and directly handover to assembly without QC checked and approval for further procced because it is mfg. on Sunday and move foreword on same date itself | Not Mentioned | Not Mentioned | In-house | ||||||||||||||||||||||||
| View Details | NCR-2024-00062 | 06/08/2024 | CCW1243M2 | GUIDE, MATERIAL CLASS 40 GREY CAST IRON for 4312 WIRELINE SET SVCR | 25 | CCW1243M2 | J2402-0034.05 | Not Mentioned | Not Mentioned | Final Inspection | QC | 06/08/2024 | NCR-24-0018 | Casting defect/blow hole found after final machining. 25numbers | Not Mentioned | Not Mentioned | In-house | ||||||||||||||||||||||||
| View Details | NCR-2024-00061 | 06/07/2024 | CGVW1NF713 | VEE PACK SEAL MATERIAL NEOPRENE+FABRIC 70DURO for 1" DUMMY WIRELINE GLV | 156 | CGVW1NF713 | Not Mentioned | Not Mentioned | Not Mentioned | Incoming Inspection | QC | 06/07/2024 | NCR-24-0017 | Outer diameter exceed maximum acceptable parameter. | Not Mentioned | Not Mentioned | In-house | ||||||||||||||||||||||||
| View Details | NCR-2024-00060 | 06/03/2024 | CNXN3810H00TC | 4 ½” X 3.813”, ”XN” Nipple Profile MATERIAL : L80 13cr , Thread connection Blank for 12.75# CSH B X P | 1 | CNXN3810H00TC | J2405-0003 | Not Mentioned | Not Mentioned | Assembly | QC | 06/03/2024 | NCR-24-016 | Deep grove mark on OD | Not Mentioned | Not Mentioned | In-house | ||||||||||||||||||||||||
| View Details | NCR-2024-00059 | 06/01/2024 | CPH845H9XXH00TC | 3 1/2" Hydro Trip Sub, 13Cr-80 Material, BLANK ends for 3-1/2" 9.2# TSH CS Hydril threads | 30 | CPH845H9XXH00TC | J2403-0066 | Not Mentioned | Not Mentioned | Assembly | QC | 06/01/2024 | NCR-24-015 Final Assembly | Assembly finished with non-confirmed part. Part number 0638242381--DIA 3/8-24 X 0.38 LTH, SHEAR SCREW DOG TYPE MATERIAL: BRASS UNS C46400 not met the required shear value. | Not Mentioned | Not Mentioned | In-house | NCR-24-015-Final-Assembly.pdf | |||||||||||||||||||||||
| View Details | NCR-2024-00058 | 05/30/2024 | CSNDF237F3 | WIPER SEAL MATERIAL : 30% GLASS FILLED PEEK | 10 | CSNDF237F3 | Not Mentioned | Not Mentioned | GR2324/00744 | Not Mentioned | QC | 05/30/2024 | NCR-24-005 (Incoming Inspection ) | 1 pcs received without machining, which is not ok as per drawing. | Not Mentioned | Not Mentioned | Supplier | Name of Customer - Tanna Polymers | NCR-24-005-Incoming-Inspection-1.pdf | ||||||||||||||||||||||
| View Details | NCR-2024-00057 | 05/30/2024 | CSNDF288F8 | MALE ADAPTER MATERIAL : 30% GLASS FILLED PEEK | 20 | CSNDF288F8 | Not Mentioned | Not Mentioned | GR2324/00744 | Not Mentioned | QC | 05/25/2024 | NCR-24-005 (Incoming Inspection ) | Require Total length 5.99mm ± 0.127 mm, observed - 6.25mm which is not ok as per drawing.1(a). Inspection report attached. | Not Mentioned | Not Mentioned | Supplier | Name of Customer - Tanna Polymers | NCR-24-005-Incoming-Inspection-.pdf | ||||||||||||||||||||||
| View Details | NCR-2024-00056 | 05/25/2024 | CSNDF288F7 | VEE RING MATERIAL : 15% GLASS, 5% MOLY FILLED TEFLON | 0 | CSNDF288F7 | Not Mentioned | Not Mentioned | GR2324/00576 | Not Mentioned | QC | 05/25/2024 | NCR-24-004 (Incoming Inspection ) | Require Total length 5.99mm ± 0.127 mm, observed - 6.25mm which is not ok as per drawing. 1. Inspection report attached. | Not Mentioned | Not Mentioned | Supplier | Name of Customer - Tanna Polymers | NCR-24-004-Incoming-Inspection-.pdf | ||||||||||||||||||||||
| Link to Single Entry | Incident No. | Incident Date | Item Part No. | Item Part Description | Quantity | Drawing No. | JO NO. | PO/SO. NO. | GRN/OR/CR No. | Operation | Created By | Created Date | Title | Incident Description | Standard | Reference | Type | Supplier / Customer Name | Disposition | Justification | Category | Root Cause | Correction Action | Correction Action Date | Correction Action Owner | Corrective Action | Corrective Action Owner | Corrective Action Date | Preventive Action | Preventive Action Owner | Preventive Action Date | Effectiveness | Effectiveness Evidence | Closure Date | Upload Document | Status |
